Aeroshell Grease 22

Sale AeroShell Grease 22

Gun Talk

A light duty grease gun with air supplied from a compressor or tank is cheap and makes greasing far easier, faster and more effective.

The typical hand-cranked grease gun will work fine on free-flowing fittings. They typically put out around 1500 psi. It normally will do just about all fittings on the plane with the stock connector. The first thing you should consider is a flexible hose to replace the rigid pipe. It makes maneuvering easier. Use a hand to hold the connector from popping off.

A light duty grease gun with air supplied from a compressor or tank is cheap and makes greasing far easier, faster and more effective.

Please take the pressure off guns with a plunger handle after use. Leaving the plunger engaged keeps pressure on the grease and tends to press all the oil out of the grease over time. What you have left is only the thickener -- not a good thing for the joint or ease of injection.

An alternative is a compressed-air-assisted gun (not the expensive shop-type) with a built-in pressure multiplier. Harbor Freight Tools is a good source for low-cost ($15 - $25) guns. These imported guns are in the low-use, modest-quality category and will not stand up to commercial duty.

ref. www.avweb.com

» Approvals
» Msds
» Bewildering Array
» One Choice
» Composition
» Primary Uses
» Mixing
» Our Picks
» Gearboxes and Motors and Servicing Fittings
» Gun Talk

AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties. The useful operating temperature range is –65°C to +204°C.